Parts Inspection
Parts inspection is a function to compare the image of a PCB captured by a CCD camera with the picture of a good PCB memorized in advance and to judge whether it passes the inspection or not with the computer. Such judgement is performed by simple specification of a portion to be inspected and inspection of the existence of parts, positional divergence of parts, wrong parts and the likes at high speed. As color factors are also inspected for judgement, objects which cannot be discriminated between defective and good by brightness only can be judge reliably.

Solder Fillets Inspection
M22Xfv Series is equipped with a red led for solder fillet inspection. The red LED, which lights during only fillet inspection, emphasizes an inclined fillet and recognized it clearly. A captured picture is processed by high-speed rendering. After the process, only fillet parts are extracted from the captured picture, and judged whether the pattern is defective or good. Reputable simple operations, which bring have been taken over for programming operations and judgement.

Solder Print Inspection
Solder print inspection is a function to inspect the status of solder printed surface by examining its area, place and form. Data processing is carried out naturally because of the use of natural light as the same as the previous parts inspection. Moreover, no special hardware is required.
Data of solder printed surface to be inspected can be made be GERBER data, automatic sampling or manual designation.